## Planning Commission Meeting May 20, 2026 at 7 p.m. ## 7071 University Avenue NE ## Agenda ## Call to Order ## Roll Call ## Approval of Meeting Minutes ## 1. Approve 10-15-2025, Planning Commission Minutes ## Public Hearing 2. Conditional Use Permit, CUP #26-01, by AMS Wireless on behalf of Public Safety Towers Company, for a new 125 foot tall telecommunications tower at 1241 72nd ## Avenue NE ## Other Business ## Elect Chair and Vice Chair ## 3. Elect Vice Chair ## Adjournment ## Accessibility Notice: • If you need free interpretation or translation assistance, please contact City staff. • Si necesita ayuda de interpretación o traducción gratis, comuníquese con el personal de la ciudad. • Yog tias koj xav tau kev pab txhais lus los sis txhais ntaub ntawv dawb, ces thov tiv tauj rau Lub Nroog cove neeg ua hauj lwm. • Haddii aad u baahan tahay tarjumaad bilaash ah ama kaalmo tarjumaad, fadlan la xiriir shaqaalaha Magaalada. Upon request, accommodation will be provided to allow individuals with disabilities to participate in any City of Fridley services, programs or activities. Hearing impaired persons who need an interpreter or other persons who require auxiliary aids should contact CityClerk@FridleyMN.gov or (763) 572-3450. Page 1 of 29 ## AGENDA REPORT ## Meeting Date: May 20, 2026 ## Meeting Type: Planning Commission ## Submitted By: Julie Beberg, Office Coordinator ## Title: Approve 10-15-2025, Planning Commission Minutes ## Background ## Approve 10-15-2025 Planning Commission Minutes ## Recommendation ## Approve 10-15-2025 Planning Commission Minutes ## Attachments and Other Resources ## 1. PC 10-15-2025 ## Vision Statement We believe Fridley will be a safe, vibrant, friendly, and stable home for families and businesses. Page 2 of 29 ## Planning Commission October 15, 2025 ## 7:00 PM ## Fridley City Hall, 7071 University Avenue NE ## Minutes ## Call to Order Acting Chair Meisner called the Planning Commission Meeting to order at 7:00 p.m. ## Present ## Pete Borman ## Aaron Brom ## Mike Heuchert ## Aaron Klemz ## Ross Meisner ## Paul Nealy ## Absent ## Mark Hansen ## Others Present ## Nancy Abts, Senior Planner ## Stacy Stromberg, Assistant Community Development and HRA Director ## Ryan Solberg, HRA/City Manager Office Intern ## Approval of Meeting Minutes 1. Approve September 17, 2025, Planning Commission Minutes Motion by Commissioner Borman to approve the minutes. Seconded by Commissioner Heuchert. Upon a voice vote, all voting aye, Acting Chair Meisner declared the motion carried unanimously. ## Public Hearing 2. Consideration of a Conditional Use Permit, CUP #25-01, by Mike Bismark and Dynamic Offensive Futbol, for Indoor Commercial Recreation for a Private Soccer Training Facility Motion by Commissioner Heuchert to open the public hearing. Seconded by Commissioner Borman. Upon a voice vote, all voting aye, Acting Chair Meisner declared the motion carried unanimously, and the public hearing was opened at 7:02 p.m. Page 3 of 29 ## Planning Commission 10/15/2025 ## Minutes Page 2 Ryan Solberg presented the request for a Conditional Use Permit (CUP) to allow tenant space 7264 – 7266 within the property at 7280 Commerce Circle East to be used for an indoor commercial recreation facility for Dynamic Offensive Futbol. He provided details on the site description and history, code requirements, analysis, CUP findings for approval, related findings, and recommended stipulations. Commissioner Klemz stated that in previous cases, the Commission has been asked to repeal out- of-date Special Use Permits (SUPs) and CUPs, and asked if there is a similar recommendation in this case. Nancy Abts, Senior Planner, replied that staff is not recommending any action on the existing SUPs for the property. Acting Chair Meisner asked if an SUP applies to the entire building or just a section. Ms. Abts replied that staff believe that the SUP would apply to the entire property unless the conditions of approval state otherwise. She stated that in this new CUP, the conditions are specific about where the use will be located within the property. Commissioner Borman asked and received confirmation that the previous SUP did not stipulate a portion of the building and therefore applied to the entire property, whereas this use would be specific to the proposed space within the building. Sam Diatta, spoke in representation of the applicant, he stated that the club is looking to find a home within Fridley, and he was present to answer any questions. Commissioner Klemz asked where the current facility is located. Mr. Diatta replied that they are currently at TCO Sports Facility in Vadnais Heights, but have to relocate and were happy to find the location in Fridley. He provided additional details on the training program they run. Acting Chair Meisner asked if the training is focused on kids or adults as well. Mr. Diatta replied that the main focus is kids, but adults participate as well at times. Commissioner Borman asked how many participants are at any session. Mr. Diatta explained that it depends upon the space, but noted a recent session with 25 kids. He stated that during the summer, they held a camp with about 80 kids. He confirmed that the space is adequate for their needs. Acting Chair Meisner asked when the business would hope to be operational in the space. Mr. Diatta replied that they would anticipate being open in January. Motion by Commissioner Heuchert to close the public hearing. Seconded by Commissioner Borman. Page 4 of 29 ## Planning Commission 10/15/2025 ## Minutes Page 3 Upon a voice vote, all voting aye, Acting Chair Meisner declared the motion carried unanimously, and the public hearing was closed at 7:19 p.m. Commissioner Borman commented that this seems to be a great use of the space, and the Commission agreed. Commissioner Nealy asked if there is a concern that this space would occupy available industrial space. Acting Chair Meisner noted that this would be a commercial use within a space that has been vacant. Motion by Commissioner Heuchert recommending approval of Conditional Use Permit, CUP #25-01, by Mike Bismark and Dynamic Offensive Futbol, for indoor commercial recreation for a private soccer training facility, subject to stipulations. Seconded by Commissioner Nealy. Upon a voice vote, all voting aye, Acting Chair Meisner declared the motion carried unanimously. It was noted that this item will go to the City Council for consideration at the November 10, 2025, meeting. 3. Consideration of a Conditional Use Permit, CUP #25-02, by Grown Rogue Unlimited, LLC, for Indoor Cannabis Cultivation at 40 77 th ## Avenue NE Motion by Commissioner Klemz to open the public hearing. Seconded by Commissioner Brom. Upon a voice vote, all voting aye, Acting Chair Meisner declared the motion carried unanimously, and the public hearing was opened at 7:22 p.m. Nancy Abts, Senior Planner, presented a request for a Conditional Use Permit for cannabis cultivation within the existing building at 40 77 th ## Avenue NE from Grown Rogue Unlimited LLC. She provided additional details about the business and its operations in three other states. She presented details of the application, site description and history, Code requirements, and staff recommendation for approval with stipulations as presented. Commissioner Brom referenced odor mitigation and asked how that would be measured/enforced. Ms. Abts provided details on how that is reviewed from the property line. She stated that if the odor is reasonably offensive at the property line, staff would ask the applicant to come into compliance. She referenced the experience of the applicant and their plan for odor mitigation. Acting Chair Meisner asked if there is an objective measure for odor. Ms. Abts replied that there is not an agreed-upon objective measure for odor. She stated that enforcement would be based upon complaints and review by City inspectors. She reviewed the steps that would be followed related to enforcement. Page 5 of 29 ## Planning Commission 10/15/2025 ## Minutes Page 4 Acting Chair Meisner asked if this type of business would place a higher burden on public safety. Ms. Abts replied that public safety did not have any concerns with this proposal. She stated that the business’ security measures would prevent anyone from wandering in. Mark Doherty, representing the applicant, stated that they are excited to bring the business to Fridley, and he was present to answer any questions. He confirmed that they do plan to purchase the building, and while taking a conservative approach initially, they would eventually plan to expand into the entire building. Commissioner Brom noted the 80 anticipated employees and asked if those are new jobs or jobs being transferred from other states. Mr. Doherty replied that those jobs would be net new to the community and estimated at full capacity. He provided input on odor mitigation and noted that, in his experience, if there were odor issues, it would be identified through complaints from neighbors. He provided details on the odor mitigation for the business. Commissioner Klemz asked if the business received a cannabis cultivation license from the Office of Cannabis Management (OCM). Mr. Doherty confirmed that they have received their license notification from the OCM. Commissioner Brom asked if the law would need to change to allow the business to build out phase two. Mr. Doherty replied that the first phase would be 10,000 square feet of cannabis canopy, and their license would allow up to 30,000 square feet of cannabis canopy. Commissioner Nealy asked about other approved cannabis cultivation licensing approved in the state. Mr. Doherty replied that currently there are two approved cultivators in the state, which have been operational under medical licensing and have been approved to convert their medical sales to retail. He stated that those cultivators are feeding their own dispensaries and are not supplying other retailers. He commented that tribal lands have been cultivating to a smaller degree as well. He provided additional details on the required testing that would be completed by a third party. Commissioner Nealy asked if the facility would have security. Mr. Doherty confirmed that the facility would be heavily secured. Commissioner Klemz asked the anticipated truck traffic for the site. Mr. Doherty replied that would be minimal as delivery is typically provided through sprinter vans. He anticipated a few trucks per week. Acting Chair Meisner asked for more details on the odor mitigation and waste material. Mr. Doherty provided additional details on the odor mitigation process the company uses. He stated that the OCM has regulations to be followed for waste management of plant material. Page 6 of 29 ## Planning Commission 10/15/2025 ## Minutes Page 5 Acting Chair Meisner asked if there would be an extra burden on fire safety and/or public safety. Mr. Doherty provided additional details on the fire safety of the building, which is already sprinkled. He stated that it is a highly secured facility, monitored 24/7, and in his experience, there has been no additional burden on public safety. He noted that the business would not even have a monument sign. He stated that their products would be wholesaled to Minnesota dispensaries. Acting Chair Meisner asked if staff has explored whether this type of business would be a target in terms of security threats. Ms. Abts recognized that this is a new activity, but none of the medical cultivators or dispensaries have reported any issues. She noted that the OCM has also been proactive in how they have set up security requirements. Acting Chair Meisner asked about employee health and safety. Mr. Doherty replied that they take employee health and safety seriously and provided information on the working conditions. Motion by Commissioner Borman to close the public hearing. Seconded by Commissioner Heuchert. Upon a voice vote, all voting aye, Acting Chair Meisner declared the motion carried unanimously, and the public hearing was closed at 8:00 p.m. Commissioner Heuchert stated that the applicant addressed any concerns expressed. Commissioner Borman recognized that odor is subjective and provided examples of odor from General Mills at times. He noted that the applicant seems to have a robust plan for odor mitigation. Motion by Commissioner Klemz recommending approval of Conditional Use Permit, CUP #25-02, by Grown Rogue Unlimited, LLC for indoor cannabis cultivation at 40 77 th Avenue NE, subject to stipulations. Seconded by Commissioner Borman. Upon a voice vote, all voting aye, Acting Chair Meisner declared the motion carried unanimously. It was noted that this item will move forward to the City Council for consideration at the November 10, 2025, meeting. ## Other Business Ms. Abts stated that the City is currently initiating a youth commissioner program, noting that applications are being accepted through October 24, 2025. It was confirmed that the youth members would be nonvoting members. ## Adjournment Page 7 of 29 ## Planning Commission 10/15/2025 ## Minutes Page 6 Motion by Commissioner Borman to adjourn the meeting. Seconded by Commissioner Heuchert. Upon a voice vote, all voting aye, Acting Chair Meisner declared the motion carried unanimously, and the meeting adjourned at 8:08 p.m. Respectfully submitted, ## Nancy Abts, Staff Liaison Page 8 of 29 ## AGENDA REPORT ## Meeting Date: May 20, 2026 ## Meeting Type: Planning Commission ## Submitted By: Nancy Abts, Senior Planner ## Stacy Stromberg, Assistant Community Development Director/HRA Title: Conditional Use Permit, CUP #26-01, by AMS Wireless on behalf of Public Safety Towers Company, for a new 125 foot tall telecommunications tower at 1241 72nd Avenue NE ## Background ## Regulatory History Cellular towers have been regulated under Fridley’s zoning code since the 1990s. The City created a list of pre-identified approved locations for cellular towers and added them to a zoning overlay district. The overlay is now known as the O-3 Telecommunications Overlay. Towers are permitted by right at properties within the overlay. Locating a tower outside the overlay district requires a Conditional Use Permit. A Telecommunications Tower CUP is allowed in M-1, M-2, and M-3 districts and railroad rights-of-way that abut these districts. ## The Request Angela Campbell of AMS Wireless has requested approval of an 125’ Wireless Telecommunications Tower. The request comes on behalf of Public Safety Towers. The tower will ultimately have wireless facilities for ATT Wireless and has been designed for at least two facilities. The tower will be located on property owned by Crysteel, located at 1241 72 nd ## Avenue NE in Fridley. This site is outside the O-3 overlay. The company could not secure a site for a new tower within the overlay. The facility will be accessed from 73 rd Avenue. (The property is a through-lot and has frontage on both 73 rd and 72 nd Avenues.) The tower base will be inside an approximately 1200 square foot fenced enclosure. Additional space is dedicated to a driveway and utility access. ## Site Description and History The subject property spans between 73 rd and 72 nd Avenues, west of Central Avenue. It is zoned M-1, Light Industrial. The property has a long history of outdoor storage and environmental contamination. Contamination has been addressed on an ongoing basis since the 1970s. There are several storage buildings on the site, dating from the 1960s onwards. In 2014, the property Page 9 of 29 was replatted to allow sale of an adjoining property. ## Code Requirements and Analysis ## Parking Application materials show 54 parking spaces. Based on warehouse use for the existing buildings, the site has enough parking spaces. ## Landscaping and Screening The property alterations do not require a completely updated landscaping plan. However, the project prompted review of the existing landscaping. There are 7 dead ash trees on the north edge of the property that must be replaced with compliant plantings. The replacement trees must meet minimum size requirements. Because of the small number of trees to be planted, they must be from different species. No more than 20% of planted trees are from a single genus. The applicant has not provided a compliant plan for replacing these trees. Additionally, telecommunications towers must be screened by “existing structures, a brick decorative wall, or a solid 100% opaque vegetative enclosure, six feet in height.” The site is not currently screened from the 72 nd Avenue right-of-way, or from the apartments located south of 72 nd Avenue. The application shows barbed wire enclosing the base of the tower, which is not allowed at this site. Barbed wire is only allowed for sites that abut a railroad right-of-way. ## Use The 125’ tall tower complies with the zoning code height requirement. ## CUP Findings for ## Approval ## Analysis Condition The potential for the proposed use to be in harmony with the general purpose and intent of the Zoning Code and the Comprehensive Plan. The comprehensive plan guides the site for Industrial land uses. Zoning code allows for a telecommunications tower as a conditional use. Not needed Page 10 of 29 The effect of the proposed use upon the health, safety and general welfare of occupants of surrounding lands. The proposed tower meets federal safety standards. However, visual impact of the tower will need to be addressed through screening and landscaping. Barbed wire is not allowed. 1, 2, 3, 4, 5, 6 The existing and anticipated traffic conditions. Traffic and parking are consistent with previous and surrounding land uses. Not needed The effect on values of property in the surroundings. Visual impact of the tower will need to be addressed through screening and landscaping. 4, 6 Staff find that the application does not meet the standards for issuing a CUP, without stipulations. Draft stipulations are provided below. ## Stipulations Staff recommends that if the conditional use permit is approved, the following stipulations be attached. 1. The telecommunications tower must comply with all requirements of the Federal ## Communications Commission, Federal Aviation Administration, and National Electric Safety Code. 2. Construction, alteration, and expansion of the telecommunications facility all require building permits. 3. The telecommunications tower design must substantially be as presented in the application materials, including: a. The tower must support more than two wireless facilities, b. The tower must be finished with a non-corrosive material, and c. The tower must be finished so as to be compatible with other buildings and structures in the area. 4. All ground equipment must be fully screened from public rights-of-way by existing structures, a brick decorative wall, or a solid 100% opaque vegetative enclosure. When used for screening purposes, chain link fences must have slats. 5. The telecommunications tower must be secured to protect against trespass, without the use of barbed or razor wire. 6. Required landscaping must be replaced as required by City Code Chapter 632, including replacement of the 8 dead ash trees on the north side of the property with 8 trees which meet the requirements of Chapter 632. Required landscaping must be replaced within one year of CUP approval. 7. The telecommunications tower must at all times be kept and maintained in good condition, order and repair. 8. Per 650.01.9.e.1 of the Fridley City Code, this Conditional Use Permit will become null and void one year after the City Council approval date if work has not commenced or if the Petitioner has not petitioned the City Council for an extension. Page 11 of 29 ## Recommendation Staff recommends the Planning Commission hold a public hearing for Conditional Use Permit, ## CUP #26-01. Staff further recommends approval of Conditional Use Permit, CUP #26-01, with the provided stipulations. ## Attachments and Other Resources ## 1. CUP 26-01 PC Report_1241 73rd Ave NE Cell Tower_Summary ## 2. Land Use Application Summary_CUP26-01 ## 3. FRIDMN-0374_Project Narrative_New Cell Tower_Crysteel ## Trucking_04.15.2026_REV1_04.29.26_REV2_05.01.2026 4. PST_FRIDMN-0374_Zoning_RevB (1) 5. PH notice resident cup 26-01-AMS Wireless ## Vision Statement We believe Fridley will be a safe, vibrant, friendly, and stable home for families and businesses. Page 12 of 29 ## Land Use Application Summary Item: CUP #26-01 Meeting Date: May 20, 2026 ## GENERAL INFORMATION SPECIAL INFORMATION ## Applicant: ## Angela Campbell, AMS Wireless, on Behalf of ## Public Safety Towers Company ## Requested Action: ## Public Hearing to consider Conditional Use Permit, CUP #26-01 for a Wireless Telecommunications Tower at 1241 72 nd ## Ave NE ## Location: 1241 72 nd ## Avenue NE ## Existing Zoning: ## M-1, Light Industrial District ## Size: 6.09 acres ## Existing Land Use: ## Industrial; Crysteel Manufacturing ## Surrounding Land Use & Zoning: ## N: Industrial, M-1 ## E: Industrial, M-2 ## S: Multi-Family, R-3 ## W: Industrial, M-2 ## Comprehensive Plan Conformance: ## The Future Land Use Map designates the property as Industrial ## Zoning Ordinance Conformance: Section 614.04.4 requires a conditional use permit for a wireless facility not located on a site within the O-3 Telecommunications Towers and Wireless Facilities Overlay District. ## Building and Zoning History: 1949 – Lot is first platted 1968 – First building constructed 1976 – Detterman Welding building constructed; some hazardous materials removed 1980s – 2nd building + expansions permitted, storage area cleaned, more materials removed, screening installed, bikeway easement granted 1990s & 2000s – Additional remediation occurs 2014 – Lot is replatted under PS14-05 to accommodate sale of adjacent property. ## Legal Description of Property: See attached survey ## Public Utilities: Building is connected. ## Transportation: Tower will be accessed from 73 rd ## Ave NE ## Physical Characteristics: Large industrial site with warehouse and large outdoor storage and parking area ## Summary of Request: ## AMS Wireless on behalf of Public Safety Towers requests approval of a conditional use permit for a 125’ tall wireless telecommunications tower at 1241 72 nd Ave NE. ## Staff Recommendation: City staff recommend approval of the conditional use permit request with stipulations. Aerial of the Property ## City Council Action/60 Day Action Date: City Council – June 8, 2026 60 Day Date – June 16, 2026 ## Staff Report Prepared by Nancy Abts Page 13 of 29 ## Permit Information: ## Permit Type: Conditional Use Permit ## Permit Subtype: Commercial ## Permit Number: CUP26-000001 ## Work Description: New Proposed Telecommunications Tower - 125' Monopole ## Property Information: ## Address: 1241 72ND AVE NE ## City, State and Zip: FRIDLEY, MN 55432 ## PIN: 123024310115 ## Property Owner Information: ## Property Owner: CTE PROPERTIES LLC ## Property Owner Address: 52248 EMBER RD ## LAKE CRYSTAL, MN 56055 ## Applicant Information: ## Name: AMS Wireless On Behalf of Public Safety Towers Company Phone: (919) 649-2486 ## Application Information: ## Zoning District M-1 Light Industrial ## Other ## SUBMITTAL REQUIREMENTS Is the applicant the property owner?No Will your project require a parking lot expansion of four (4) or more parking stalls. ## No ## Payment Information: ## Payment DateReceived FromPayment Amount 04/17/2026Anegla Campbell$1,541.25 ## Signature: ## Application Date: ## Application Date: 04/17/2026 60-Day Deadline: 06/16/2026 120-Day Extension: 08/15/2026 ## Review Dates: ## Activity NameDate ## Planning Commission Meeting05/20/2026 ## City Council Meeting06/08/2026 Page 14 of 29 May 1, 2026 ## Project Narrative for ## FRIDMN-0374 1241 72 nd ## Ave NE Fridley MN 55432 ## Parcel Number: 12-30-24-31-0115 The proposed site is located on a 6.09-acre parcel owned by CTE Properties, LLC, a limited liability company under the laws of Minnesota (Crysteel Trucking). Public Safety Towers (PST) is proposing to install a new Wireless Communications Facility at 1241 72 nd Ave NE Fridley MN 55432. PST is proposing to construct a 125’ Monopole (tower) within a 35’ x 35’ lease area that will be enclosed with fencing. The purpose of the proposed site is in response to changes in technology for wireless services, and a commitment to providing better service throughout the area, to existing and potential customers. There is a need to increase coverage as well as safety services and data capabilities in this area, so this will help service the surrounding areas and fill in the current gaps in coverage. This parcel of property is zoned M1 - Light Industrial District and will meet the following criteria: Maximum Height of 125’ Will support more than two wireless facilities for tower equipment as well as more than two facilities for the ground support structure. Tower will be designed to blend in with surrounding environment Proposed tower is a monopole design and will be finished with non-corrosive material Proposed tower will not be illuminated Location of tower is inside a fenced area at the Crysteel Trucking Equipment property which is currently screened from public right of ways with fencing and vegetation and not near any residential parcels. All ground equipment will be enclosed with steel cabinet structures Tower will be reasonably posted and secured to protect against trespass and designed to discourage unauthorized climbing Signs no larger than four square feet in size will be posted Ordinary and reasonable care of tower and facility will always be employed; tower and facility will be maintained in good condition order and repair so that the same shall not menace or endanger the life or property of any person Public Safety Towers will install and maintain the tower and facility in compliance with the requirements of the National Electric Safety Code and all FCC, State and local regulations, and in such a manner that will not interfere with the use of other property All maintenance or construction on tower and facility will be performed by qualified personnel Compliance with all FCC radio frequency standards will be maintained by public safety towers and copies of all FCC information will be provided to the City annually In the event the use of the tower or facility is discontinues by public safety tower company or if a notice to FCC is filed for discontinues use, tower owner will provide written notice to the City. An attempt was made to locate a new telecommunications facility on one of the pre-approved properties listed on Fridley City Code Chapter 205.30 Telecommunications Towers and Facilities District, Appendix A. The only property on the list that met the location criteria is number 9 on the list, the Cummins Corporation. The Cummins Corporation declined a ground lease offer for a tower. George Mbuthia, Logistics Site Manager advised that the Cummins Corporation is transforming their property and a tower would hinder that process. Please see documents attached below: Site Lease Agreement between Crysteel Trucking & Public Safety Towers dated 2/17/2026 ## FAA Determination of No Hazard Letter dated 3/13/2026 ## FCC Antenna Registration dated 4/10/2026 ## Radio Frequency Electromagnetic Energy (RF-EME) Compliance Report dated 3/15/2026 ## Environmental Geotechnical Report by TEP (Tower Engineering Professionals) dated 3/19/2026 Documents uploaded to the Portal: ## Survey, SMW Engineering Group dated 12/3/2025 ## Site Plan / Site Drawings, AMS Wireless Solutions dated 10/24/2025 ## Valmont Tower Design dated 4/1/2026 Letter of Authorization from Property Owner dated 4/15/2026 Page 15 of 29 Please let me know if you have any questions or need any additional information. Thank you! ## Angela Campbell ## Project Manager 919.649.2486 ## 4431 Town Center Place ## Kingwood, TX 77339 angela@ams-wireless.com Page 16 of 29 ## REVISION ## REFER: ELECTRICAL FOR ## ADDITIONAL SYMBOLS ## APPLICANT AGENT : ## A&E FIRM : ## CONSTRUCTION : ## SITE ## DRAWING INDEX ## VICINITY MAP ## CODE COMPLIANCE ## PROJECT SUMMARY ## PROJECT TEAMDRAWING SYMBOLS ## N O R T H ## N O R T H ## ELEVATION NUMBER ## SHEET NUMBER FOR ## ELEVATIONDETAIL NUMBER ## SHEET NUMBER FOR DETAIL ## APPROVALS ## NOT FOR DISCLOSURE OUTSIDE TELECOMMUNICATION CLIENT WITHOUT ## WRITTEN PERMISSION. ## CONFIDENTIAL AND PROPRIETARY ## TITLE SHEET ## X ## A-X ## X ## A-X 1 ## CRYSTEEL TRUCKING ## FRIDMN-0374 ## 125'-0" MONOPOLE ## FA: 16434618 1241 72nd AVE. NE ## FRIDLEY, MN 55432 ## NAME: AMS WIRELESS ## ADDRESS: 4431 TOWN CENTER PLACE ## CONTACT: ANGELA CAMPBELL ## PHONE: (919) 649-2486 EMAIL: ANGELA@AMS-WIRELESS.COM ## PROPERTY OWNER: ## STRUCTURE HEIGHT: ## PARCEL NUMBER: ## LATITUDE (NAD 83):LONGITUDE (NAD 83): ## ZONING JURISDICTION:ZONING DISTRICT: ## OCCUPANCY GROUP:CONSTRUCTION TYPE:OTHER WIRELESS FACILITIES: ## POWER COMPANY: ## TELEPHONE COMPANY: ## SITE INFORMATION ## CONTRACTOR SHALL PROVIDE ALL MATERIALS, LABOR, TOOLS, TRANSPORTATION, ETC. TO FULLY EXECUTE WORK. WORK REQUIREMENTS DETAILED ON THEDRAWINGS AND SPECIFICATIONS AND SHALL INCLUDE, BUT NOT BE LIMITED TO, THEFOLLOWING ITEMS: ## ALL NEW EQUIPMENT INDICATED IN DRAWINGS IS AN UNMANNED TRANSMISSION ## FACILITY FOR TELECOMMUNICATION CELLULAR SERVICES. ## GROUND LEVEL· INSTALL (1) 125'-0" TALL TOWER INSIDE NEW 1,225 SQ. FT (35'-0"x35'-0") FENCED ## COMPOUND · ## INSTALL NEW 6'-0" CHAINLINK FENCE WITH (3) STRANDS OF BARB WIRE · ## INSTALL (1) 12'-0" ACCESS GATE · ## INSTALL NEW MULTI-TENANT H-FRAME · ## INSTALL (1) NEW SCH. 40 ELECTRICAL CONDUIT · ## INSTALL (1) NEW SCH. 40 FIBER CONDUIT ## ANTENNA LEVEL · ## INSTALL (1) ANCHOR ANTENNA MOUNT ## THE SIZE, HEIGHT AND DIRECTION OF ANTENNAS SHALL BE ADJUSTED TO MEET ## SYSTEM REQUIREMENTS. ## DRIVING DIRECTIONS ## SHEET NUMBER: ## SHEET TITLE: ## SITE INFORMATION: ## 1241 72ND AVE. NE ## FRIDLEY, MN 55432 ## PST ## REV. ## DATE: ## DESCRIPTION: ## DRAWN BY: ## CHECKED BY: ## PSTC PROJECT NUMBER: ABERSD-0373PLANS PREPARED BY AMS WIRELESS ## SITE NUMBER: ## SITE ADDRESS: ## FRIDMN-0374 ## T-1 All drawings and written material contained herein may not be duplicated, used or disclosed without the written consent of the architect. ## AMS ## BY: ## 100% ZONING NOTE: THE ORIGINAL SIZE OF THIS PLAN IS 24" X 36". SCALE RATIO IS NOT VALID FOR REDUCED OR ENLARGED SHEET SIZES. ## FOR SUBMITTAL ## DATE: 05-06-2026 ## 125'-0" MONOPOLE ## SITE NAME: ## CRYSTEEL ## TRUCKING ## A 10/24/25 ## KE ## 4431 TOWN CENTER PLACE ## KINGWOOD, TX | 77339 ## KYLE@AMS-WIRELESS.COM 270.316.7546 ## REVISED 100% ZD ## B 05/06/26 ## KE ## NAME: AMS WIRELESS ## ADDRESS: 4431 TOWN CENTER PLACE ## CONTACT: KYLE ELLIOTT ## PHONE: (270) 316-7546 EMAIL: KYLE@AMS-WIRELESS.COM ## NOTE: ## 48 HOURS PRIOR TO DIGGING, ## CONTRACTOR TO NOTIFY ALL UTILITYCOMPANIES TO LOCATE ALL ## UNDERGROUND UTILITIES. ## R ## Call before you dig. below. Know what's ## OPERATIONS:RF ENGINEER: ## CONSTRUCTION: ## DATE:DATE:DATE: ## THE FOLLOWING PARTIES HEREBY APPROVE AND ACCEPT THESE DOCUMENTS ## AND AUTHORIZE THE CONTRACTOR TO PROCEED WITH THE CONSTRUCTION ## DESCRIBED HEREIN. ALL DOCUMENTS ARE SUBJECT TO REVIEW BY THE LOCAL ## BUILDING DEPARTMENT AND MAY IMPOSE CHANGES OR SITE MODIFICATIONS. ## SITE ACQUISITION: ## DATE: ## COMPLIANCE: ## DATE: ## PM: ## DATE:DATE: ## SITE OWNER: 2020 MINNESOTA BUILDING CODE2020 MINNESOTA MECHANICAL CODE2023 MINNESOTA ELECTRICAL CODE2020 MINNESOTA PLUMBING CODETIA-222 CODE ## IN THE EVENT OF CONFLICT, THE MOST ## RESTRICTIVE CODE SHALL PREVAIL ## RF ENGINEER : ## NAME: ## ADDRESS: ## CONTACT: ## EMAIL: ## GENERAL NOTES ## THE FACILITY IS UNMANNED AND NOT FOR HUMAN HABITATION. A TECHNICIAN WILL VISIT THE SITE AS REQUIRED FOR ROUTINE MAINTENANCE. THE PROJECTWILL NOT RESULT IN ANY SIGNIFICANT DISTURBANCE OR EFFECT ON DRAINAGE; NO SANITARY SEWER SERVICE, POTABLE WATER, OR TRASH DISPOSAL ISREQUIRED AND NO COMMERCIAL SIGNAGE IS PROPOSED. ## T-1: ## TITLE SHEET ## SURVEY ## GN-1: ## GENERAL NOTES ## GN-2: ## GENERAL NOTES (CONT.) ## A-1: ## OVERALL PARCEL PLAN ## A-1.1: ENLARGED SITE PLANA-2: ## COMPOUND PLAN ## A-3: ## GRADING PLAN ## A-4: ## TOWER ELEVATION ## A-5: ## SITE DETAILS ## SITE ACQUISITION : ## ZONING : ## NAME: ## ADDRESS: ## CONTACT: ## PHONE: EMAIL: ## NAME: AMS WIRELESS ## ADDRESS: 4431 TOWN CENTER PLACE ## CONTACT: CHARLIE MISCHEL ## PHONE: (858) 583-2525 EMAIL: CHARLIE@AMS-WIRELESS.COM ## FROM MINNEAPOLIS-SAINT PAUL INTERNATIONAL AIRPORT: 1. ## GET ON MN-5 E GLUMACK DR 2. ## MERGE ONTO MN-5 E 3. ## MERGE ONTO I-35E N IN SAINT PAUL 4. ## FOLLOW I-35E N AND I-694 W TO MN-65 N/HWY 65 NE/CENTRAL AVE. INFRIDLEY 5. ## TAKE EXIT 38 FROM I-694 6. ## FOLLOW MN-65 N/HWY 65 NE 7. ## TURN RIGHT ONTO 73rd AVE NE 8. ## DESTINATION WILL BE ON THE RIGHT ## CRYSTEEL TRUCKING 1241 72nd AVE NE ## FRIDLEY, MN 55432 125'-0" 12-30-24-31-0115 45.1000239 ° -93.239677 ° ## CITY OF FRIDLEY ## M-1 LIGHT INDUSTRIAL DISTRICT ## UTILITY ## V-B ## NONE ## NORTHWESTERN ENERGY ## AT&T ## NAME: ## ADDRESS: ## CONTACT: ## PHONE: EMAIL: ## KINGWOOD, TX 77339 KINGWOOD, TX 77339 ## KINGWOOD, TX 77339 Page 17 of 29 Page 18 of 29 Page 19 of 29 ## SHEET NUMBER: ## SHEET TITLE: ## SITE INFORMATION: ## 1241 72ND AVE. NE ## FRIDLEY, MN 55432 ## PST ## REV. ## DATE: ## DESCRIPTION: ## DRAWN BY: ## CHECKED BY: ## PSTC PROJECT NUMBER: ABERSD-0373 ## PLANS PREPARED BY AMS WIRELESS ## SITE NUMBER: ## SITE ADDRESS: ## FRIDMN-0374 ## GN-1 All drawings and written material contained herein may not be duplicated, used or disclosed without the written consent of the architect. ## AMS ## BY: ## 100% ZONING NOTE: THE ORIGINAL SIZE OF THIS PLAN IS 24" X 36". SCALE RATIO IS NOT VALID FOR REDUCED OR ENLARGED SHEET SIZES. ## FOR SUBMITTAL ## DATE: 05-06-2026 ## 150'-0" MONOPOLE ## SITE NAME: ## CRYSTEEL ## TRUCKING ## A 10/24/25 ## KE ## 4431 TOWN CENTER PLACE ## KINGWOOD, TX | 77339 ## KYLE@AMS-WIRELESS.COM 270.316.7546 ## REVISED 100% ZD ## B 05/06/26 ## KE ## GENERAL NOTES ## GENERAL NOTES: 1. DRAWINGS ARE NOT TO BE SCALED, WRITTEN DIMENSIONS TAKE PRECEDENCE. THIS SET OFPLANS IS INTENDED TO BE USED FOR DIAGRAMMATIC PURPOSES ONLY, UNLESS NOTED ## OTHERWISE. THE GENERAL CONTRACTOR'S SCOPE OF WORK SHALL INCLUDE FURNISHING ALL ## MATERIALS, EQUIPMENT AND LABOR DEEMED NECESSARY TO COMPLETE INSTALLATIONS ASDESCRIBED HEREIN. ## 2. CONTRACTOR SHALL FAMILIARIZE HIMSELF WITH THE PROJECT THROUGH INSPECTION OF THE ## JOB SITE, DRAWINGS AND SPECIFICATIONS, SO AS TO THOROUGHLY UNDERSTAND THE WORK. ## ANY AND ALL DISCREPANCIES AND OMISSIONS SHALL BE REPORTED AND CLARIFICATION SHALL ## BE OBTAINED FROM THE ARCHITECT PRIOR TO WORK BEING DONE. ANY WORK THAT PROCEEDS ## OTHERWISE SHALL BE, IF INCORRECTLY PERFORMED, REPLACED OR REPAIRED WITH THE COST FOR SAME BEING BORNE BY THE CONTRACTOR. THE CONTRACTOR SHALL VERIFY AND BERESPONSIBLE FOR ALL DIMENSIONS AND CONDITIONS IN FIELD. IF DIMENSIONAL ERROR OCCURS ## OR CONDITIONS NOT COVERED IN THE DRAWINGS ARE ENCOUNTERED, CONTRACTOR SHALL ## NOTIFY THE ARCHITECT BEFORE COMMENCING THAT PORTION OF THE WORK. ## 3. CONTRACTOR SHALL OBTAIN WRITTEN AUTHORIZATION TO PROCEED WITH CONSTRUCTION PRIOR TO STARTING WORK ON ANY ITEM NOT CLEARLY DEFINED BY THE CONSTRUCTIONDRAWINGS/CONTRACT DOCUMENTS. ## 4. CONTRACTOR SHALL SUPERVISE AND DIRECT THE PROJECT DESCRIBED HEREIN. THE ## CONTRACTOR SHALL BE SOLELY RESPONSIBLE FOR ALL CONSTRUCTION MEANS, METHODS, ## TECHNIQUES, SEQUENCES AND PROCEDURES AND FOR COORDINATING ALL PORTIONS OF THE ## WORK UNDER THE CONTRACT. ## 5. CONTRACTOR SHALL INSTALL ALL EQUIPMENT AND MATERIALS ACCORDING TO ## MANUFACTURER'S/ VENDOR'S SPECIFICATIONS UNLESS NOTED OTHERWISE OR WHERE LOCAL ## CODES OR ORDINANCES TAKE PRECEDENCE. ## 6. ALL WORK PERFORMED ON PROJECT AND MATERIALS INSTALLED SHALL BE IN STRICT COMPLIANCE WITH ALL APPLICABLE CODES, REGULATIONS, AND ORDINANCES. CONTRACTORSHALL GIVE ALL NOTICES AND COMPLY WITH ALL LAWS, ORDINANCES, RULES, REGULATIONS ## AND LAWFUL ORDERS OF ANY PUBLIC AUTHORITY, MUNICIPAL AND UTILITY COMPANY ## SPECIFICATIONS, AND LOCAL AND STATE JURISDICTIONAL CODES BEARING ON THE ## PERFORMANCE OF THE WORK. ## 7. THE STRUCTURAL COMPONENTS OF THIS PROJECT ARE NOT TO BE ALTERED BY THIS ## CONSTRUCTION PROJECT UNLESS WRITTEN APPROVAL IS OBTAINED FROM THE STRUCTURAL ## ENGINEER. ## 8. DRAWINGS ASSUME THE EXISTING BUILDING TO BE IN COMPLIANCE WITH CODE REQUIREMENTS. ## ANY VIOLATIONS OF CODES IN EXISTING BUILDING DISCOVERED DURING THE COURSE OF CONSTRUCTION WILL BE BROUGHT IMMEDIATELY TO THE ATTENTION OF THE BUILDING OWNEROR THEIR REPRESENTATIVES. ## 9. CONTRACTOR SHALL PROVIDE AT THE PROJECT SITE A FULL SET OF CONSTRUCTION ## DOCUMENTS UPDATED WITH THE LATEST REVISIONS AND ADDENDA OR CLARIFICATIONS FOR ## THE USE BY ALL PERSONNEL INVOLVED WITH THE PROJECT. ## 10. DETAILS ARE USUALLY KEYED ONCE ON THE DRAWINGS AND ARE TYPICAL FOR SIMILAR ## CONDITIONS THROUGHOUT, UNLESS OTHERWISE NOTED. DETAILS INCLUDED HEREIN ARE ## INTENDED TO SHOW END RESULT OF DESIGN. MINOR MODIFICATIONS MAY BE REQUIRED TO SUIT ## JOB CONDITIONS OR SITUATIONS, AND SUCH MODIFICATIONS SHALL BE INCLUDED AS PART OF ## THE SCOPE OF WORK. 11. DIMENSIONS ARE FROM FINISH FACE TO FACE. (UNLESS NOTED OTHERWISE)12. THE CONTRACTOR SHALL MAKE NECESSARY PROVISIONS TO PROTECT EXISTING ## IMPROVEMENTS, EASEMENTS, PAVING, CURBING, ETC. DURING CONSTRUCTION AND UPON COMPLETION OF WORK. CONTRACTOR SHALL REPAIR ANY DAMAGE THAT MAY OCCUR DUE TOCONSTRUCTION ON OR ABOUT THE PROPERTY. IN ADDITION THE CONTRACTOR SHALL FOLLOW ## ALL SAFETY REQUIREMENTS OF THE AUTHORITY HAVING JURISDICTION OVER HIS WORK. ## 13. CONTRACTOR SHALL BE RESPONSIBLE FOR MAINTAINING THE SITE IN A CLEAN AND SAFE ## CONDITION, INCLUDING PROPER REMOVAL OF WASTE MATERIAL. WASTE MATERIAL SHALL NOT ## BE STORED WITHIN OR NEAR THE BUILDING. DUMPSTERS PROVIDED FOR THE DISPOSAL OF ## WASTE MATERIAL SHALL BE REMOVED AWAY FROM THE BUILDING BUT MAY BE STORED ON SITE DAILY. PROTECT EXISTING ASPHALT PARKING SURFACE AND REPAIR AT NO EXPENSE TO THEBUILDING OWNER ANY DAMAGE CAUSE BY THE USE OF THE DUMPSTERS. ## 14. THE ARCHITECTS/ENGINEERS HAVE MADE EVERY EFFORT TO SET FORTH IN THE CONSTRUCTION ## AND CONTRACT DOCUMENTS THE COMPLETE SCOPE OF WORK. MINOR OMISSIONS OR ERRORS ## IN THE DRAWINGS AND OR SPECIFICATIONS SHALL NOT EXCUSE THE CONTRACTOR FROM ## COMPLETING THE PROJECT AND IMPROVEMENTS IN ACCORDANCE WITH THE INTENT OF THESE ## DOCUMENTS. ## 15. SPECIAL INSPECTIONS SHALL BE PERFORMED BY AN INDEPENDENT SPECIAL INSPECTOR, AS ## REQUIRED, PER SECTION 1704 OF THE INTERNATIONAL BUILDING CODE (IBC). ## 16. CONTRACTOR SHALL GUARANTEE IN WRITING ALL LABOR, MATERIALS, AND WORKMANSHIP ## INSTALLED BY HIM FOR A PERIOD OF NOT LESS THAN ONE (1) YEAR AFTER DATE OF ## ACCEPTANCE OF THE WORK BY THE OWNER EXCEPT AS MODIFIED HEREIN OR ON OTHER ## DRAWINGS. SHOULD DEFECTS OCCUR, ALL WORK SHALL BE REPLACED OR PROPERLY REPAIRED ## AT NO ADDITIONAL COST TO THE OWNER. 17. ## CONTRACTOR SHALL BE RESPONSIBLE FOR VERIFYING ALL COMBUSTIBLE FLUIDS, INCLUDING ## PAINTS, PRIMERS, SEALERS, SOLVENTS AND ADHESIVES, COMPLY AND ARE BEING USED IN ## ACCORDANCE WITH THE PRODUCT MANUFACTURER'S WRITTEN INSTRUCTIONS. CONTRACTOR ## SHALL PROVIDE STORAGE FOR SUCH MATERIALS AWAY FROM THE BUILDING. USE OF THE ## BUILDING FOR SUCH STORAGE IS PROHIBITED. 18. ## CONTRACTOR TO HAVE ALL EASEMENTS AND UNDER GROUND UTILITIES LOCATED AND MARKED ## PRIOR TO COMMENCING SITE WORK. ## 19. ELECTRICAL, MECHANICAL AND PLUMBING PERMITS SHALL BE THE RESPONSIBILITY OF THEIR ## RELATIVE SUB-CONTRACTORS. 20. ## OWNER SHALL PROVIDE PORTABLE FIRE EXTINGUISHERS PER LOCAL FIRE ## MARSHALL. CONTRACTOR TO INSTALL. ## 21. CONTRACTOR SHALL COORDINATE ALL WORK WITH PROPERTY OWNER REPRESENTATIVE ## INCLUDING BUT NOT LIMITED TO SCHEDULE, PROCEDURES, SECURITY, AND CONSTRUCTING ## LOADING AND UNLOADING. ## 22. ALL CONSTRUCTION SHALL BE IN ACCORDANCE WITH THE JURISDICTION'S CURRENT ADOPTED ## VERSION OF INTERNATIONAL BUILDING CODE (IBC), (IPC), (IMC) AND NEC. ## 23. SEAL ALL PENETRATIONS THROUGH FIRE RATED ASSEMBLY WITH U.L. LISTED OR F.M. APPROVED ## MATERIALS TO MAINTAIN RATING INTEGRITY OF ASSEMBLY. ## 24. THE GENERAL CONTRACTOR IS RESPONSIBLE FOR REDLINING THE CONSTRUCTION ## PLANS TO ## ILLUSTRATE THE AS-BUILT CONDITION OF THE SITE. THIS WILL BE DONE AFTER THE SITE HAS ## BEEN AWARDED THE FINAL INSPECTION. TWO COPIES OF ## REDLINED DRAWINGS WILL BE ## PROVIDED TO CLIENT / PROJECT MANAGER. ## ELECTRICAL (UNLESS NOTED OTHERWISE): 1. ## THE CONTRACTOR IS RESPONSIBLE FOR ALL PERMITTING, FILING, AND FEES IN CONJUNCTION ## WITH THE PROJECT. 2. ## ALL LABOR AND MATERIAL SHALL CONFORM TO ALL LOCAL, STATE, AND NATIONAL CODES, ## RULES, REGULATIONS AND STANDARDS. 3. ## ALL EQUIPMENT, WIRING, AND MATERIALS MUST HAVE A UL LABEL. 4. ALL WORK SHALL BE DONE BY QUALIFIED AND EXPERIENCED JOURNEYMEN AND PERFORMED INA WORKMANLIKE MANNER AND SHALL PROCEED IN AN ORDERLY MANNER SO AS NOT TO HOLD ## UP THE PROGRESS OF THE PROJECT. 5. ## THOROUGHLY TEST ALL LINES, FEEDERS, EQUIPMENT, AND DEVICES WITH MAXIMUM LOADS TO ## ASSURE PROPER OPERATION. 6. ## CONDUITS AND FITTINGS FOR OUTSIDE APPLICATIONS SHALL BE RIGID OR NON-METALLIC ## UNLESS OTHERWISE NOTED. 7. ## ALL WIRES SHALL BE COPPER; USE OF ALUMINUM CONDUCTORS WILL NOT BE PERMITTED. SEE ## ELECTRICAL PLANS FOR SIZING AND LOCATIONS. USE PROPER SIZE CONNECTORS PER LOCAL, ## STATE, AND NATIONAL CODES. 8. ## CONDUCTOR LENGTHS SHALL BE CONTINUOUS FROM TERMINATION TO TERMINATION WITHOUT ## SPLICES. 9. ## PROVIDE PULL BOXES WHERE SHOWN AND WHERE REQUIRED BY CODES AND UTILITY ## COMPANIES. 10. ## ALL WIRES SHALL BE TAGGED AT ALL PULL BOXES, J-BOXES, EQUIPMENT BOXES, AND CABINETS ## WITH APPROVED PLASTIC TAGS. 11. ALL UNDERGROUND CONDUITS SHALL BE SCHEDULE 40 PVC. ALL SWEEPS OR BENDS, ANDABOVE-GROUND CONDUITS SHALL BE RIGID GALVANIZED STEEL OR PVC SCHEDULE 80. ALL ## CONDUITS NOT TERMINATING INTO A CLOSED AREA MUST BE SEALED TO PREVENT ENTRY OF ## ANY MOISTURE OR FOREIGN OBJECTS. ALL CONDUIT RISERS TO INCLUDE SLIP TYPE EXPANSION ## JOINT. ## GROUNDING (UNLESS NOTED OTHERWISE): 1. ## THE GROUNDING SYSTEM CONNECTIONS SHALL BE MADE WITH EXOTHERMIC WELDS AND/OR ## MECHANICAL TWO-LUG COMPRESSION CONNECTORS AS INDICATED ON PLANS. USE ONLY ## STAINLESS STEEL SCREWS, BOLTS WASHERS, AND NUTS FOR FASTENING. 2. CLEAN SURFACES THOROUGHLY BEFORE APPLYING GROUND LUGS OR CLAMPS. IF SURFACE ISCOATED, THE COATING MUST BE REMOVED DOWN TO THE BARE METAL. AFTER THE COATING ## HAS BEEN REMOVED, APPLY A NON-CORROSIVE APPROVED COMPOUND TO THE CLEANED SURFACE AND INSTALL LUGS OR CLAMPS. WHERE GALVANIZING IS REMOVED FROM METAL, ITSHALL BE PAINTED OR TOUCHED UP WITH COLD GALVANIZING PAINT SUCH AS GLAVMOX OR ## EQUAL. 3. ## ALL CLAMPS, SLEEVES, AND SUPPORTS USED TO SUPPORT OR CHANNEL THE GROUNDING ## SYSTEM CONDUCTORS AND PVC CONDUITS SHALL BE PVC TYPE NON-CONDUCTIVE. DO NOT USE ## METAL BRACKETS OR SUPPORTS THAT WOULD FORM A COMPLETE RING AROUND ANY ## GROUNDING CONDUCTOR. 4. ALL GROUNDING CONNECTIONS SHALL BE COATED WITH T&B KOPR SHIELD ANTI-CORROSIVEAGENT. NO SUBSTITUTIONS ARE PERMITTED. VERIFY THE PRODUCT WITH TELECOMMUNICATION ## CLIENT PRIOR TO USAGE. ## PRODUCTS ## 1. GENERAL REQUIREMENTS: ALL MATERIALS AND EQUIPMENT SHALL BE IN ACCORDANCE WITH ## CONTRACT DOCUMENTS AND STANDARD PRODUCTS OF THE VARIOUS MANUFACTURERS, WITH ## ALL MATERIALS AND EQUIPMENT TO BE NEW, CLEAN, UNDAMAGED, AND FREE OF DEFECTS AND ## CORROSION. ## 2. ACCEPTABLE PRODUCTS: THE PRODUCT OF A SPECIFIED OR APPROVED MANUFACTURER WILL ## BE ACCEPTABLE ONLY WHEN THE PRODUCT COMPLIES WITH OR IS MODIFIED AS NECESSARY TO ## COMPLY WITH ALL REQUIREMENTS OF THE CONTRACT DOCUMENTS. ## 3. COMMON ITEMS: WHERE MORE THAN ONE OF ANY SPECIFIC ITEM IS REQUIRED, ALL SHALL BE OF ## THE SAME TYPE AND MANUFACTURER. ## 4. UL LISTING: ALL MATERIALS AND EQUIPMENT SHALL BE UNDERWRITERS LABORATORIES (UL) ## LISTED AND LABELED, WHERE UL STANDARDS AND LISTINGS EXIST FOR SUCH MATERIALS OR ## EQUIPMENT. ## EPOXY AND EXPANSION ANCHORS 1. ## EPOXY OR EXPANSION ANCHORS SHALL NOT BE USED EXCEPT WHERE SPECIFICALLY SHOWN ## ON THE PLANS OR WHEN APPROVED IN ADVANCE BY THE STRUCTURAL ENGINEER. 2. ## DRILLED HOLES SHALL BE PREPARED AND ANCHORS SHALL BE INSTALLED IN ACCORDANCE ## WITH THE MANUFACTURER'S RECOMMENDATIONS AND THE CURRENT ICC REPORT. 3. SPECIAL INSPECTION SHALL BE DONE IN ACCORDANCE WITH BUILDING CODE AND THESPECIFIC INSPECTION REQUIREMENTS SET FORTH IN THE CURRENT ICC REPORT. 4. ## ANCHOR RODS USED FOR EPOXY ANCHORS SHALL BE THE TYPE SPECIFIED IN THE ## REFERENCED ICC REPORT. 5. ## THE ANCHOR SIZE AND EMBEDMENT SHALL BE AS INDICATED ON THE PLANS. 6. ## WHERE PERMITTED, EPOXY ANCHORING SHALL BE COMPLETED WITH THE FOLLOWING ## ALLOWED PRODUCT(S): HILTI RE-500 SD (ICC# ESR-2322, LARR-25700) - CONCRETE ONLYHILTI HIT-HY 150 (ICC# ER-5193, LARR-25652M) - MASONRY WALL ONLY.HILTI HIT-HY 20 (ICC# ER-4815, LARR-24564) - BRICK WALL ONLY. 7. ## WHERE PERMITTED, THE FOLLOWING EXPANSION ANCHORS MAY BE USED: ## HILTI KWIK BOLT TZ (ICC# ESR-1917, LARR-25701) - CONCRETE ONLY. ## SIMPSON STONG-BOLT (ICC# ESR-1771, LARR-25705) - CONCRETE ONLY. ## HILTI KWIK BOLT 3 (ICC#ESR-1385, LARR-25577)GROUTFILLED MASONRY ONLY ## SIMPSON WEDGE-ALL (ICC# ESR-1396, LARR-24682) - GROUT FILLED MASONRY ONLY. ## 1. ALL FLASHING, COUNTER FLASHING, COPING AND ALL OTHER SHEET METAL SHALL BE OF NOT ## LESS THAN NO. 20 U.S. GAUGE CORROSION-RESISTANT METAL U.N.O. ALL METAL MUST BE ## GALVANIZED AFTER FABRICATION. ## 2. FLASH AND COUNTER FLASH AT ALL ROOF TO WALL CONDITIONS. G.I. FLASH AND CAULK WOOD ## BEAMS AND OUTLOOKERS PROJECTING THROUGH EXTERIOR WALLS OR ROOF SURFACES. ## 3. FLASH ALL EXTERIOR OPENINGS WITH APPROVED WATERPROOFING, WHICH CONFORMS TO THE ## STANDARDS OF LOCAL AND STATE CODES. ## 4. ALL CONNECTIONS TO BUILDING WALLS OR ROOFS MUST BE FLASHED AND MADE WATERTIGHT ## USING LIKE MATERIALS IN ACCORDANCE WITH NRCA ROOFING STANDARDS AND DETAILS. ## CONTRACTOR SHALL OBTAIN DETAILING CLARIFICATION FOR SITE-SPECIFIC CONDITIONS FROM ARCHITECT/ENGINEER, IF NECESSARY, BEFORE PROCEEDING. PLANS ARE NOT TO BE SCALEDAND ARE INTENDED TO BE A DIAGRAMMATIC OUTLINE ONLY, UNLESS NOTED OTHERWISE. ## FLASHING AND SHEET METAL ## 1. ALL MATERIALS AND WORKMANSHIP SHALL BE IN ACCORDANCE WITH THE LATEST REVISED ## EDITION OF THE AISC MANUAL OF STEEL CONSTRUCTION, WHICH INCLUDES SPECIFICATION FOR ## STRUCTURAL STEEL BUILDINGS, CODE OF STANDARD PRACTICE AND AWS STRUCTURAL ## WELDING CODE. IDENTIFY AND MARK STEEL PER CBC 2203. ## 2. STRUCTURAL STEEL SHOP DRAWINGS SHALL BE REVIEWED BY THE ENGINEER/ ARCHITECT PRIOR ## TO FABRICATION. ## 3. GROUTING OF COLUMN BASE PLATES: BASE PLATES SHALL BE DRYPACKED OR GROUTED WITH ## NON-SHRINK, NON-FERROUS GROUT. MINIMUM COMPRESSIVE STRENGTH SHALL BE 4,000 PSI AT ## 28 DAYS. ALL SURFACES SHALL BE PROPERLY CLEANED OF FOREIGN MATERIAL PRIOR TO ## GROUTING. ## 4. ALL EXPOSED WELDS SHALL BE FILLED AND GROUND SMOOTH WHERE METAL COULD COME IN ## CONTACT WITH THE PUBLIC. ## 5. NO HOLES OTHER THAN THOSE SPECIFICALLY DETAILED SHALL BE ALLOWED THRU STRUCTURAL STEEL MEMBERS. BOLT HOLES SHALL CONFORM TO AISC SPECIFICATION, AND SHALL BESTANDARD HOLES UNLESS OTHERWISE NOTED. NO CUTTING OR BURNING OF STRUCTURALSTEEL WILL BE PERMITTED WITHOUT PRIOR CONSENT OF THIS ENGINEER. HOLES IN STEELSHALL BE DRILLED OR PUNCHED. ALL SLOTTED HOLES SHALL BE PROVIDED WITH SMOOTH ## EDGES. BURNING OF HOLES AND TORCH CUTTING AT THE SITE IS NOT PERMITTED. ## 6. WELDING: CONFORM TO AWS D1.1. WELDERS SHALL BE CERTIFIED ## 7. BOLTING: ASTM A307 BOLTS SHALL BE INSTALLED "SNUG TIGHT" PER AISC SECTION RCSC 8(C), ## ASTM A325 BOLTS SHALL CONFORM TO RCSC SECTION 8 (D). ## 8. FABRICATION: CONFORM TO AISC SPECIFICATION SEC M2 "FABRICATION" AND AISC CODE SEC 6 ## "FABRICATION AND DELIVERY" PERFORM WORK ON PREMISES OF A FABRICATOR APPROVED BY ## THE BUILDING OFFICIAL. ## 9. GALVANIZING: ALL EXPOSED STEEL OUTSIDE THE BUILDING ENVELOPE SHALL BE HOT-DIPPED ## GALVANIZED. APPLY FIELD TOUCH-UPS PER ASTM A153. ## 10. ALL FRAMING CONNECTORS SUCH AS CONCRETE ANCHORS, HOLD-DOWNS, POST BASES, ## FRAMING CAPS, HANGER AND OTHER MISCELLANEOUS STRUCTURAL METALS SHALL BE AS ## MANUFACTURED BY SIMPSON STRONG TIE CO. OR APPROVED EQUAL. 11. ALL STRUCTURAL STEEL EXPOSED TO EARTH SHALL HAVE 3" CONCRETE COVER.12. MATERIALS SHALL CONFORM TO THE FOLLOWING SPECIFICATIONS: ## STRUCTURAL STEEL ## ANCHOR BOLTS/ RODS: ## BARS & PLATES:BOLTS IN WOOD:BOLTS - HIGH STRENGTH: ## C-, M-, AND ANGLE SHAPES: ## DEFORMED WELDED WIRE FABRIC: ## GROUT: ## OTHER STRUCTURAL SHAPES: ## REINFORCING BARS (WELDED):REINFORCING BARS (REGULAR): ## SMOOTH WELDED WIRE FABRIC:STEEL GRATING:STEEL PIPE: ## TIE WIRE:TUBE STEEL & PIPE COLUMNS: ## W - SHAPES:WELDING ELECTRODES: ## ASTM F1554, GRADE 36ASTM A36ASTM A307ASTM A325SC OR A325NASTM A36ASTM A497 ## EMBECO OR EQUIVALENT ASTM A36ASTM A706. GRADE 60, DEFORMED BARSASTM A615, GRADE 60, DEFORMED BARSASTM A185ANSI/NAAMM MBG 531-00ASTM A53, GRADE B ## 16.5 GAGE OR HEAVIER, BLACK ANNEALED ## ASTM A500, GRADE BASTM A992, GRADE 50 ## E70XX FOR STRUCTURAL STEELE80XX FOR REINFORCING BARSE60XX FOR LIGHT GAUGE AND METAL DECK Page 20 of 29 ## SHEET NUMBER: ## SHEET TITLE: ## SITE INFORMATION: ## 1241 72ND AVE. NE ## FRIDLEY, MN 55432 ## PST ## REV. ## DATE: ## DESCRIPTION: ## DRAWN BY: ## CHECKED BY: ## PSTC PROJECT NUMBER: ABERSD-0373 ## PLANS PREPARED BY AMS WIRELESS ## SITE NUMBER: ## SITE ADDRESS: ## FRIDMN-0374 ## GN-2 All drawings and written material contained herein may not be duplicated, used or disclosed without the written consent of the architect. ## AMS ## BY: ## 100% ZONING NOTE: THE ORIGINAL SIZE OF THIS PLAN IS 24" X 36". SCALE RATIO IS NOT VALID FOR REDUCED OR ENLARGED SHEET SIZES. ## FOR SUBMITTAL ## DATE: 05-06-2026 ## 150'-0" MONOPOLE ## SITE NAME: ## CRYSTEEL ## TRUCKING ## A 10/24/25 ## KE ## 4431 TOWN CENTER PLACE ## KINGWOOD, TX | 77339 ## KYLE@AMS-WIRELESS.COM 270.316.7546 ## REVISED 100% ZD ## B 05/06/26 ## KE ## GENERAL NOTES ## (CONT.) ## FRAMING 1. ## ALL LUMBER SHALL BE GRADE MARKED DOUGLAS FIR-LARCH AND SHALL HAVE THE FOLLOWING ## MINIMUM GRADES: ## JOISTS AND RAFTERS #1 ## BEAMS AND STRINGERS #1 ## PLATES #2 ## STUDS (2X4, 3X4, 2X6) #1 ## POSTS, COLUMNS AND TIMBER #1 2. ## ALL FRAMING EXPOSED TO THE WEATHER OR IN CONTACT WITH MASONRY OR CONCRETE SHALL ## BE PRESSURE-TREATED IN ACCORDANCE WITH THE AMERICAN WOOD PRESERVERS ASSOCIATION ## SPECIFICATIONS. WHERE POSSIBLE, ALL CUTS AND HOLES SHOULD BE COMPLETED BEFORE ## TREATMENT. CUTS AND HOLES DUE TO ON-SITE FABRICATION SHALL BE BRUSHED WITH 2 COATS OF COPPER NAPHTHENATE SOLUTION CONTAINING A MINIMUM OF 2% METALLIC COPPER INSOLUTION (PER AWPA STD. M4). 3. ## CUTTING OR NOTCHING OF WOOD STUDS OR PLATES SHALL NOT EXCEED 25% OF THE STUD/PLATE WIDTH AT EXTERIOR OR BEARING WALLS AND SHALL NOT EXCEED 40% OF THESTUD/PLATE WIDTH IN NONBEARING PARTITIONS. BORED HOLE DIAMETERS ARE LIMITED TO 40%OF THE STUD WIDTH IN ANY STUD AND MAY BE 60% IN NONBEARING PARTITIONS OR WHEN THE ## BORED STUD IS DOUBLED. 4. DO NOT NOTCH JOISTS, RAFTERS, OR BEAMS EXCEPT WHERE SHOWN ON THE DETAILS. BOREDHOLES THROUGH JOISTS SHALL NOT EXCEED 1/3 OF MEMBER DEPTH AND BE LOCATED AT LEAST ## 2" FROM THE TOP AND BOTTOM OF THE MEMBER. 5. ## ALL BLOCKING AND BRIDGING SHALL BE PROVIDED AS REQUIRED PER GOVERNING CODE OR ## STANDARD OF PRACTICE. 6. ## ALL JOIST, RAFTER & MISC. FRAMING SHALL HAVE FULL-DEPTH (OR METAL) BRIDGING AT ALL ## SUPPORTS, MIDSPAN AND AT A MAXIMUM SPACING OF 8'-0" O/C IN BETWEEN UNLESS NOTEDOTHERWISE. 7. ## PROVIDE DOUBLE JOISTS UNDER ALL PARTITIONS THAT ARE PARALLEL TO JOISTS. USE 2-16D ## NAILS AT 16" O.C. TO NAIL DOUBLE JOISTS TOGETHER. 8. ## THE CONTRACTOR SHALL CAREFULLY SELECT LUMBER TO BE USED IN LOADBEARING ## APPLICATIONS. THE LENGTH OF SPLIT ON THE WIDE FACE OF 2" NOMINAL LOADBEARING FRAMING ## SHALL BE LIMITED TO LESS THAN 1/2 OF THE WIDE FACE DIMENSION. THE LENGTH OF SPLIT ON ## THE WIDE FACE OF 3" (NOMINAL) AND THICKER LUMBER SHALL BE LIMITED TO 1/2 OF THE NARROW ## FACE DIMENSION. 9. ## BOLT HOLES SHALL BE CAREFULLY CENTERED AND DRILLED NOT MORE THAN 1/16" LARGER THAN ## THE BOLT DIAMETER. PROVIDE WASHERS BETWEEN BOLT HEADS OR NUTS AND WOOD. BOLTED ## CONNECTIONS SHALL BE SNUGGED TIGHT BUT NOT TO THE EXTENT OF CRUSHING WOOD UNDER ## WASHERS. 10. ## ALL BOLTS SHALL BE RE-TIGHTENED PRIOR TO APPLICATION OF PLASTER, PLYWOOD, ETC. AND ## BEFORE CLOSING IN COMPLETION OF THE JOB. 11. ## PREFABRICATED METAL JOIST HANGERS, HURRICANE CLIPS, HOLD-DOWN ANCHORS AND OTHER ## ACCESSORIES SHALL BE AS MANUFACTURED BY "SIMPSON STRONG-TIE COMPANY" OR APPROVED EQUAL. INSTALL ALL ACCESSORIES PER THE MANUFACTURER'S REQUIREMENTS. ALL STEEL SHALLHAVE A MINIMUM THICKNESS OF 0.04 INCHES (PER ASTM A446, GRADE A) AND BE GALVANIZED ## (COATING G60). 12. ## STRUCTURAL STEEL PLATE CONNECTORS SHALL CONFORM TO ASTM A-36 SPECIFICATIONS AND ## BE 1/4" THICK UNLESS OTHERWISE INDICATED. 13. ## ALL PLATES, ANCHORS, NAILS, BOLTS, NUTS, WASHERS, AND OTHER MISCELLANEOUS HARDWARE ## THAT ARE EXPOSED OR IN CONTACT WITH PRESSURE TREATED LUMBER SHALL BE HOT DIP ## GALVANIZED. 14. ## BOLTS IN WOOD SHALL BE A MINIMUM OF 7 BOLT DIAMETERS FROM THE ENDS AND 4 BOLT ## DIAMETERS FROM THE EDGES. 15. ALL SILL BOLTS SHALL BE PLACED STARTING 9" FROM THE ENDS OF A BOARD OR FROM A NOTCHAND SPACED AT INTERVALS AS NOTED ON THE PLANS. 16. ## ALL SILL PLATE ANCHOR BOLTS AND HOLD-DOWN CONNECTOR BOLTS AT ALL PLYWOOD SHEAR ## PANELS SHALL HAVE THE FOLLOWING PLATE WASHERS. ## BOLT SIZE ## PLATE WASHER SIZE (ASTM A-36) 5/8" ## 0.229" X 3" X 3" 3/4" ## 5/16" X 3" X 3" 7/8" ## 5/16" X 3" X 3" 1" ## 3/8" X 3-1/2" X 3-1/2" 17. ## TOP PLATES FOR ALL STUD WALLS SHALL BE 2-2X. MINIMUM TOP PLATE LAP SHALL BE 48" WITH 16d NAILS AT 4" O.C. EACH SIDE OF SPLICE U.N.O. SPLICES IN UPPER AND LOWER PLATES SHALL ## BE STAGGERED 10' MINIMUM. 18. ## ALL WOOD STUD WALLS SHALL HAVE 2X4 STUDS AT 16" O.C. WHEN HEIGHT BETWEEN LATERAL ## SUPPORTS IS LESS THAN 10'-0". WHEN HEIGHT BETWEEN LATERAL SUPPORTS MORE THAN 10'-0", ## USE 2X6 STUDS AT 16" O.C. WITH FULL DEPTH BLOCKING AT NOT MORE THAN 8' VERTICAL ## INTERVAL. 19. ## ALL NAILS SHALL BE COMMON WIRE NAILS U.N.O. SEE FRAMING PLANS OR DETAILS FOR NAIL ## SIZES AND SPACING. NAILS THAT ARE NOT DETAILED OR NOTED SHALL BE IN ACCORDANCE WITH ## IBC TABLE 2304.9.1. FASTENING SCHEDULE. HOLES FOR NAILS SHALL BE PREDRILLED AT A ## SMALLER DIAMETER THAN THE NAIL WHERE NECESSARY TO PREVENT SPLITTING. 20. ## LAG BOLTS SHALL HAVE LEAD HOLES BORED AS FOLLOWS: ## SHANK PORTION ## SAME DIAMETER AND LENGTH AS SHANK ## THREADED PORTION ## 0.6-0.75 OF DIAMETER OF THREAD Page 21 of 29 ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## ROW ## ROW ## ROW ## ROW ## ROW ## ROW ## ROW ## ROW ## ROW ## ROW ## ROW ## ROW op op ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## D ## D ## D ## E ## E ## 73RD AVE ## ASPHALT PAVEMENT ## 66' PUBLIC RIGHT-OF-WAY ## PARENT TRACT ## PARCEL ID: 12-30-24-31-0115 ## CTE PROPERTIES LLC ## INSTRUMENT NO. 157779 ## LOT 1, BLOCK 1 ## PLAT BOOK K22, PAGE 12 ## PARCEL ID: 12-30-24-31-0031 ## FETTING LEASING LLC ## INSTRUMENT NO. 1504274 ## PARCEL ID: 12-30-24-31-0055 ## CTE PROPERTIES LLC ## INSTRUMENT NO. 85966E ## PARCEL ID: 12-30-24-31-0056 ## LIGHTHOUSE HOLDINGS FRIDLEY LLC ## INSTRUMENT NO. 120715E ## ROW ## ROW ## ROW ## ROW ## ROW ## S 01°06'12" E 296.84' 886 887 886 888 887 886 887 886 885 884 883 884 884 884 ## PARCEL ID: 12-30-24-31-0116 ## FRIDLEY PROPERTY OWNER LLC ## INSTRUMENT NO. 107547E ## U.G. FIBER ## U.G. FIBER ## U.G. FIBER ## U.G. FIBER ## U.G. FIBER ## U.G. FIBERU.G. FIBERU.G. FIBER ## U.G. FIBER ## U.G. FIBER ## UGE ## UGE ## UGE ## UGE ## UGE ## UGEUGEUGE ## UGE ## UGE ## X ## X ## X ## X ## X ## X ## X ## X ## XXXX ## XXXX ## X ## X ## X ## X ## X ## X ## X 1 ## A-1 ## GENERAL NOTES ## OVERALL PARCEL PLAN SCALE FOR 24x36: 1"= 40'-0" SCALE FOR 11X17: 1" = 80'-0" 0 20' 40' 80' 60' ## N O R T H ## PROPERTY LINEROAD CENTERLINE ## LEGEND ## OVERALL PARCEL PLAN ## SHEET NUMBER: ## SHEET TITLE: ## SITE INFORMATION: ## 1241 72ND AVE. NE ## FRIDLEY, MN 55432 ## PST ## REV. ## DATE: ## DESCRIPTION: ## DRAWN BY: ## CHECKED BY: ## PSTC PROJECT NUMBER: ABERSD-0373 ## PLANS PREPARED BY AMS WIRELESS ## SITE NUMBER: ## SITE ADDRESS: ## FRIDMN-0374 ## A-1 All drawings and written material contained herein may not be duplicated, used or disclosed without the written consent of the architect. ## AMS ## BY: ## 100% ZONING NOTE: THE ORIGINAL SIZE OF THIS PLAN IS 24" X 36". SCALE RATIO IS NOT VALID FOR REDUCED OR ENLARGED SHEET SIZES. ## FOR SUBMITTAL ## DATE: 05-06-2026 ## 150'-0" MONOPOLE ## SITE NAME: ## CRYSTEEL ## TRUCKING ## A 10/24/25 ## KE ## 4431 TOWN CENTER PLACE ## KINGWOOD, TX | 77339 ## KYLE@AMS-WIRELESS.COM 270.316.7546 ## REVISED 100% ZD ## B 05/06/26 ## KE ## UNDERGROUND UTILITIES: ## EXISTING UNDERGROUND UTILITIES ARE NOT SHOWN. CONTRACTOR TO ## LOCATE AND PROTECT ALL EXISTING UNDERGROUND UTILITIES DURING ## CONSTRUCTION.CONTRACTOR NOTES: 1. CONTRACTOR SHALL REPAIR ALL DAMAGE RESULTING FROMCONSTRUCTION BACK TO PRE-CONSTRUCTION CONDITION ATCOMPLETION OF WORK. 2. ## CONTRACTOR SHALL COORDINATE SITE ACCESS TIMES AND EQUIPMENTSTAGING LOCATIONS WITH LANDLORD. ±446.0' ## (N) PROJECT LOCATION ±74.3' ±25.5' ±74.3' ## FRIDLEY CODE 631 NOTES ## PARKING REQUIREMENT PER CITY CODE 631: · ## EXISTING AND PROPOSED USE - WAREHOUSE AND DISTRIBUTIONFACILITY (1 SPOT PER 2,000 SQ. FT.) · ## CURRENT BUILDING SQ. FT. (TO REMAIN THE SAME) - ±49,214 · ## REQUIRED PARKING - 25 SPOTS · ## EXISTING PARKING - 54 SPOTS · ## PROPOSED PARKING - 1 PROPOSED (55 TOTAL) ## CURRENT SITE EXCEEDS REQUIRED PARKING PER CITY CODE 631 ## (E) PARKING ## SPOTS 32 ## (E) PARKING ## SPOTS 5 ## (E) PARKING ## SPOTS 9 4 ## (E) PARKING ## SPOTS 4 ## (E) PARKING ## SPOTS ## (E) BUILDING ## (E) BUILDING ## (E) LOADING ## DOCK Page 22 of 29 ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## ROW ## ROW ## ROW ## ROW ## ROW ## ROW ## ROW ## ROW ## ROW ## ROW ## ROW ## ROW ## ROW ## ROW ## ROW ## ROW op ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## U.G. FIBER ## U.G. FIBER ## U.G. FIBER ## U.G. FIBER ## U.G. FIBER ## U.G. FIBER ## U.G. FIBERU.G. FIBERU.G. FIBERU.G. FIBER ## U.G. FIBER ## U.G. FIBER ## U.G. FIBER ## UGE ## UGE ## UGE ## UGE ## UGE ## UGE ## UGEUGEUGEUGE ## UGE ## UGE ## UGE ## D ## D ## D ## E ## E ## 73RD AVE ## ASPHALT PAVEMENT ## 66' PUBLIC RIGHT-OF-WAY ## PARENT TRACT ## PARCEL ID: 12-30-24-31-0115 ## CTE PROPERTIES LLC ## INSTRUMENT NO. 157779 ## LOT 1, BLOCK 1 ## PLAT BOOK K22, PAGE 12 ## PARCEL ID: 12-30-24-31-0031 ## FETTING LEASING LLC ## INSTRUMENT NO. 1504274 886 887 886 888 887 886 887 886 885 884 883 884 884 884 ## PARCEL ID: 12-30-24-31-0116 ## FRIDLEY PROPERTY OWNER LLC ## INSTRUMENT NO. 107547E ## X ## X ## X ## X ## X ## X ## XXXXXX ## XXXXXX ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X 1 ## A-1.1 ## GENERAL NOTES ## ENLARGED SITE PLAN SCALE FOR 24x36: 1"= 30'-0" SCALE FOR 11X17: 1" = 60'-0" 0 15' 30' 60' 45' ## N O R T H ## PROPERTY LINEROAD CENTERLINE ## LEGEND ## ENLARGED SITE PLAN ## SHEET NUMBER: ## SHEET TITLE: ## SITE INFORMATION: ## 1241 72ND AVE. NE ## FRIDLEY, MN 55432 ## PST ## REV. ## DATE: ## DESCRIPTION: ## DRAWN BY: ## CHECKED BY: ## PSTC PROJECT NUMBER: ABERSD-0373 ## PLANS PREPARED BY AMS WIRELESS ## SITE NUMBER: ## SITE ADDRESS: ## FRIDMN-0374 ## A-1.1 All drawings and written material contained herein may not be duplicated, used or disclosed without the written consent of the architect. ## AMS ## BY: ## 100% ZONING NOTE: THE ORIGINAL SIZE OF THIS PLAN IS 24" X 36". SCALE RATIO IS NOT VALID FOR REDUCED OR ENLARGED SHEET SIZES. ## FOR SUBMITTAL ## DATE: 05-06-2026 ## 150'-0" MONOPOLE ## SITE NAME: ## CRYSTEEL ## TRUCKING ## A 10/24/25 ## KE ## 4431 TOWN CENTER PLACE ## KINGWOOD, TX | 77339 ## KYLE@AMS-WIRELESS.COM 270.316.7546 ## REVISED 100% ZD ## B 05/06/26 ## KE ## (N) 125'-0" MONOPOLE (N) 12'-0" x 23'-0" ## ANCHOR TENANT ## LEASE AREA (N) 10'-0" x 15'-0" ## FUTURE CO-LOCATOR ## TENANT LEASE AREA (N) PSTC 35'-0" x 35'-0" COMPOUND LEASE AREA (34'-0" x 34'-0"FENCED) ## (N) 12'-0" ACCESS GATE ## (N) PSTC UNDERGROUND ## POWER AND FIBER ## CONDUIT IN JOINT TRENCH 35'-0" 35'-0" ## (N) PSTC UTILITY H-FRAME ## (E) UTILITY ## POLE W/ ## TRANSFORMER ## (N) PSTC 30'-0" ACCESS ## AND UTILITY EASEMENT UNDERGROUND UTILITIES:EXISTING UNDERGROUND UTILITIES ARE NOT SHOWN. CONTRACTOR TOLOCATE AND PROTECT ALL EXISTING UNDERGROUND UTILITIES DURING ## CONSTRUCTION.CONTRACTOR NOTES: 1. CONTRACTOR SHALL REPAIR ALL DAMAGE RESULTING FROMCONSTRUCTION BACK TO PRE-CONSTRUCTION CONDITION ATCOMPLETION OF WORK. 2. ## CONTRACTOR SHALL COORDINATE SITE ACCESS TIMES AND EQUIPMENTSTAGING LOCATIONS WITH LANDLORD. ## (N) 6'-0" CHAINLINK ## FENCE W/ 3 STRANDS ## OF BARBED WIRE ## (E) BUILDING ## (E) SHED ## (E) ASPHALT LOT ## (N) PSTC 10'-0" UTILITY ## EASEMENT ## (E) 20'-0" ACCESS GATE ## (E) 28'-0" ACCESS GATE ## (N) DEDICATED PSTC ## PARKING SPOT 2 ## A-1.1 2 ## A-1.1 ## LANDSCAPE EXCEPTION EXHIBIT ## NOT TO SCALE ## (N) 125'-0" MONOPOLE(SIMULATION FOR ## ILLUSTRATIVE PURPOSES ## ONLY AND NOT TO SCALE) ## (E) FENCE WITH SCREENING ## SLATS AND MATURE TREES ## (TO REMAIN) ## REF. LANDSCAPE EXCEPTIONEXHIBIT FOR SIMULATED VIEW ## LANDSCAPE NARRATIVE: CURRENTLY THE EXISTING SITE HAS MATURE VEGETATION ALONG WITH A CHAIN LINK FENCE WITHSCREENING SLATS ALONG 73rd AVE AS ILLUSTRATED IN THE ABOVE SIMULATION. DUE TO THE ## EXISTING CONDITIONS THE PROPOSED COMPOUND FENCE, ALL GROUND EQUIPMENT ## WOULD NOT BE VISIBLE FROM 73rd AVE OR ANY OTHER SURROUNDING PUBLIC RIGHT OF WAYS.PSTC WOULD LIKE TO REQUEST A VARIANCE FROM ANY REQUIRED LANDSCAPE PER CHAPTER 632 ## IN THE CITY CODE SINCE ANY LANDSCAPE PROPOSED AROUND THE COMPOUND LEASE AREA ## WOULD NOT BE VISIBLE DUE TO EXISTING CONDITIONS AND CURRENT LANDSCAPE AND ## SCREENING MEASURES IN PLACE. ## APPROXIMATE ## ILLUSTRATION OF ## COMPOUND FENCE ## LOCATED BEHINDEXISTING SCREENFENCE Page 23 of 29 ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## U.G. FIBER ## UGE 886 888 ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX ## XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## UGE ## A-2 ## SHEET NUMBER: ## SHEET TITLE: ## SITE INFORMATION: ## 1241 72ND AVE. NE ## FRIDLEY, MN 55432 ## PST ## REV. ## DATE: ## DESCRIPTION: ## DRAWN BY: ## CHECKED BY: ## PSTC PROJECT NUMBER: ABERSD-0373 ## PLANS PREPARED BY AMS WIRELESS ## SITE NUMBER: ## SITE ADDRESS: ## FRIDMN-0374 ## A-2 All drawings and written material contained herein may not be duplicated, used or disclosed without the written consent of the architect. ## AMS ## BY: ## 100% ZONING NOTE: THE ORIGINAL SIZE OF THIS PLAN IS 24" X 36". SCALE RATIO IS NOT VALID FOR REDUCED OR ENLARGED SHEET SIZES. ## FOR SUBMITTAL ## DATE: 05-06-2026 ## 150'-0" MONOPOLE ## SITE NAME: ## CRYSTEEL ## TRUCKING ## A 10/24/25 ## KE ## 4431 TOWN CENTER PLACE ## KINGWOOD, TX | 77339 ## KYLE@AMS-WIRELESS.COM 270.316.7546 ## REVISED 100% ZD ## B 05/06/26 ## KE ## COMPOUND PLAN SCALE FOR 24x36: 1/4"= 1'-0" SCALE FOR 11X17: 1/8" = 1'-0" 0 2' 4' 8' 6' ## N O R T H 1 ## A-2 ## COMPOUND PLAN (N) 12'-0" x 23'-0" ANCHOR ## TENANT LEASE AREA (N) 10'-0" x 15'-0" ## FUTURE CO-LOCATOR ## TENANT LEASE AREA (N) PSTC 35'-0" x 35'-0" COMPOUND LEASE AREA (34'-0" x 34'-0" ## FENCED) ## (N) 12'-0" ACCESS GATE ## (N) PSTC UNDERGROUND ## POWER AND FIBER ## CONDUIT IN JOINT TRENCH ## 50'-0" LEASE AREA ## (N) PSTC UTILITY H-FRAME ## (N) PSTC 30'-0" ACCESS ## AND UTILITY EASEMENT ## 34'-0" FENCED AREA ## 35'-0" LEASE AREA ## 34'-0" FENCED AREA 17'-6" ## (N) 125'-0" MONOPOLE ## (N) PSTC FIBER HANDHOLE ## H-FRAME; APPROXIMATELOCATION 1 ## A-4 ## (N) 6'-0" CHAINLINK ## FENCE W/ 3 STRANDS ## OF BARBED WIRE ## (E) 20'-0" ACCESS GATE ## (N) PSTC 10'-0" UTILITY ## EASEMENT 17'-6" 11'-0" 12'-0" 11'-0" 3'-0" 4'-0" ## (N) DEDICATED PSTC ## PARKING SPOT Page 24 of 29 ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X 886 888 ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX ## XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## X ## A-3 ## SHEET NUMBER: ## SHEET TITLE: ## SITE INFORMATION: ## 1241 72ND AVE. NE ## FRIDLEY, MN 55432 ## PST ## REV. ## DATE: ## DESCRIPTION: ## DRAWN BY: ## CHECKED BY: ## PSTC PROJECT NUMBER: ABERSD-0373 ## PLANS PREPARED BY AMS WIRELESS ## SITE NUMBER: ## SITE ADDRESS: ## FRIDMN-0374 ## A-3 All drawings and written material contained herein may not be duplicated, used or disclosed without the written consent of the architect. ## AMS ## BY: ## 100% ZONING NOTE: THE ORIGINAL SIZE OF THIS PLAN IS 24" X 36". SCALE RATIO IS NOT VALID FOR REDUCED OR ENLARGED SHEET SIZES. ## FOR SUBMITTAL ## DATE: 05-06-2026 ## 150'-0" MONOPOLE ## SITE NAME: ## CRYSTEEL ## TRUCKING ## A 10/24/25 ## KE ## 4431 TOWN CENTER PLACE ## KINGWOOD, TX | 77339 ## KYLE@AMS-WIRELESS.COM 270.316.7546 ## REVISED 100% ZD ## B 05/06/26 ## KE ## GRADING PLAN SCALE FOR 24x36: 1/4"= 1'-0" SCALE FOR 11X17: 1/8" = 1'-0" 0 2' 4' 8' 6' ## N O R T H 1 ## A-3 ## GRADING PLAN 887.2 887.4 888.4 ## T/CONCRETE ## (N) COMPOUND TO MAINTAIN ## EXISTING GRADE ## GRADING NOTES 1. ## COMPOUND TO MAINTAIN EXISTING GRADE 2. ## EXISTING ACCESS ROUTE ASPHALT TO MAINTAIN ORIGINAL GRADE (N) 12'-0" x 23'-0" ANCHOR ## TENANT LEASE AREA (N) 10'-0" x 15'-0" ## FUTURE CO-LOCATOR ## TENANT LEASE AREA (N) PSTC 35'-0" x 35'-0" COMPOUND LEASE AREA (34'-0" x 34'-0"FENCED) ## (N) 12'-0" ACCESS GATE ## (N) PSTC UTILITY H-FRAME ## (N) PSTC 30'-0" ACCESS ## AND UTILITY EASEMENT ## (N) 125'-0" MONOPOLE ## (N) 6'-0" CHAINLINK ## FENCE W/ 3 STRANDS ## OF BARBED WIRE ## (E) 20'-0" ACCESS GATE ## (N) PSTC 10'-0" UTILITY ## EASEMENT 887.6 887.0 888.0 Page 25 of 29 ## A-4 ## SHEET NUMBER: ## SHEET TITLE: ## SITE INFORMATION: ## 1241 72ND AVE. NE ## FRIDLEY, MN 55432 ## PST ## REV. ## DATE: ## DESCRIPTION: ## DRAWN BY: ## CHECKED BY: ## PSTC PROJECT NUMBER: ABERSD-0373 ## PLANS PREPARED BY AMS WIRELESS ## SITE NUMBER: ## SITE ADDRESS: ## FRIDMN-0374 ## A-4 All drawings and written material contained herein may not be duplicated, used or disclosed without the written consent of the architect. ## AMS ## BY: ## 100% ZONING NOTE: THE ORIGINAL SIZE OF THIS PLAN IS 24" X 36". SCALE RATIO IS NOT VALID FOR REDUCED OR ENLARGED SHEET SIZES. ## FOR SUBMITTAL ## DATE: 05-06-2026 ## 150'-0" MONOPOLE ## SITE NAME: ## CRYSTEEL ## TRUCKING ## A 10/24/25 ## KE ## 4431 TOWN CENTER PLACE ## KINGWOOD, TX | 77339 ## KYLE@AMS-WIRELESS.COM 270.316.7546 ## REVISED 100% ZD ## B 05/06/26 ## KE ## TOWER ELEVATION SCALE FOR 24x36: 1/4"= 1'-0" SCALE FOR 11X17: 1/8" = 1'-0" 0 2' 4' 8' 6' 1 ## A-4 ## TOWER ELEVATION ## RAD CENTER OF (N) ANCHOR TENANT ANTENNAS ## ±121'-0" AGL ## RAD CENTER OF FUTURE CO-LOCATOR ## TBD ## TOP OF (N) MONOPOLE ## ±125'-0" AGL ## FINSH GRADE ## 0'-0" AGL ## TOP OF (N) FENCE ## ±6'-0" AGL ## TOP OF (N) BARBED WIRE ## ±7'-0" AGL ## (N) 6'-0" CHAINLINK ## FENCE W/ 3 STRANDS ## OF BARBED WIRE ## (N) 12'-0" ACCESS GATE ## (N) PSTC UTILITY H-FRAME ## (N) 125'-0" MONOPOLE ## TOP OF (N) LIGHTNING ROD ## ±130'-0" AGL Page 26 of 29 ## A-5 ## SHEET NUMBER: ## SHEET TITLE: ## SITE INFORMATION: ## 1241 72ND AVE. NE ## FRIDLEY, MN 55432 ## PST ## REV. ## DATE: ## DESCRIPTION: ## DRAWN BY: ## CHECKED BY: ## PSTC PROJECT NUMBER: ABERSD-0373 ## PLANS PREPARED BY AMS WIRELESS ## SITE NUMBER: ## SITE ADDRESS: ## FRIDMN-0374 ## A-5 All drawings and written material contained herein may not be duplicated, used or disclosed without the written consent of the architect. ## AMS ## BY: ## 100% ZONING NOTE: THE ORIGINAL SIZE OF THIS PLAN IS 24" X 36". SCALE RATIO IS NOT VALID FOR REDUCED OR ENLARGED SHEET SIZES. ## FOR SUBMITTAL ## DATE: 05-06-2026 ## 150'-0" MONOPOLE ## SITE NAME: ## CRYSTEEL ## TRUCKING ## A 10/24/25 ## KE ## 4431 TOWN CENTER PLACE ## KINGWOOD, TX | 77339 ## KYLE@AMS-WIRELESS.COM 270.316.7546 ## REVISED 100% ZD ## B 05/06/26 ## KE ## SITE DETAILS 3 ## A-5 ## NOT TO SCALE 7 ## A-5 ## NOT TO SCALE 4 ## A-5 ## NOT TO SCALE ## NOT USED 5 ## A-5 ## NOT TO SCALE ## COMPOUND GRAVEL CROSS SECTION ## (N) NOT USED ## NUTS ON ALL BOLTS SHALL BE TOWARD ## THE INTERIOR OF THE COMPOUND. ## SECURITY ## FENCE ## 10'-0" MAX. ## LINEPOST ## 2" NORMAL ON UNEVEN ## GROUND. THIS DIMENSION ## MAY VARY FROM 1" MIN. TO 2"MAX. FOR A MAX. HORIZONTALDISTANCE OF 8'-0" 6'-0" ## FABRIC TIE ## SPACED12"C/C MAX. ## 1/2 FABRIC ## WIDTH ## MIDDLE RAIL ## 10'-0" MAX. ## 2/3 FABRIC WIDTH ## LINE ## POST ## 20' MAX. ## SPACING ## EXPANSION ## COUPLING ## LINE POST ## POST TOP ## TRUSS ## ROD ## FABRIC ## BRACE ## STRETCHER ## BAR ## POST FOOTING ## TERMINAL OR ## CORNER ## POST 3" O.D. ## POST TOP ## GATE ## LATCH ## WITH ## STYMIE ## LOCK 6'-0" 12'-0" ## LINE POST H BEAM 2" ## X 2 1/2" OR 2 1/2" O.D. ## R.F. SIGNAGE ## GROUND LINE ## TENSION WIRE ## STRETCHER ## BAR ## BOTTOM GATE ## HINGE ## GATE POST ## TOP GATE ## 3 STRANDS OF ## BARBED WIRE ## (U.N.O.) ## LINE ## POSTS ## GATE ## FRAME ## TRUSS ## RODS ## STRETCHER ## BAR ## BRACE ## TRUSS ## ROD ## 2 1/2" MAX. (MANUF. ## SHALL MODIFY AS ## REQUIRED TO MEETMAX.) ## TOP RAIL ## 1 5/8" O.D. ## GATE POST 4"O.D. ## LIGHT REFLECTORS 6"x12" (4 TOTAL) ## MUSHROOM ## STOP 6'-0" ## HINGE 1'-0" 1'-0" 1 ## A-5 ## NOT TO SCALE ## VEHICLE GATE ARRANGEMENT 2 ## A-5 ## NOT TO SCALE ## POST/CORNER POST ARRANGEMENT ## ASTM C-33 #57 ## STONECOMPACTED BASECOURSECOMPACTEDSUB-GRADE NOT ## LESS THAN 95% OFMAX. UNIT WEIGHT ## TO A DEPTH OF 6" ## CLASS 4 GEOTEXTILE ## MATERIAL "MIRAFI-500X" ## (OR EQUAL) 4" 6" ## POST TOP Page 27 of 29 ## PUBLIC HEARING NOTICE To: Property Owners and Residents within 350 feet of 1241 72 nd ## Avenue NE Applicant: AMS Wireless on behalf of Public Safety Towers Company Request: Conditional Use Permit, CUP#26-01, for a new 125 foot tall telecommunications tower at 1241 72 nd Avenue NE, the legal description is on file and available at Fridley Civic Campus. Date of Hearings: Planning Commission Meeting, Wednesday, May 20, 2026 at 7:00 p.m. The Planning Commission meeting is televised live the night of the meeting on Channel 17. Location of Planning Commission Hearing: Meeting will be held in person at Fridley Civic Campus located at 7071 University Avenue NE. How to Participate: 1. You may attend the public hearing in person and testify. 2. You may submit a letter in advance of the meeting to Nancy Abts, Senior Planner, at the address above or by email at ## Nancy.Abts@fridleymn.gov Questions: Call or Email Nancy Abts, Senior Planner at 763-572-3593 or ## Nancy.Abts@fridleymn.gov Mailing date: May 8, 2026 Publication date: May 3, 2026 Upon request, accommodation will be provided to allow individuals with disabilities to participate in any City of Fridley services, programs or activities. Hearing impaired persons who need an interpreter or other persons who require auxiliary aids should contact CityClerk@FridleyMN.gov or (763) 572-3450. ## Fridley Civic Campus ## 7071 University Ave N.E. Fridley, MN 55432 763-571-3450 | FAX: 763-571-1287 | FridleyMN.gov Page 28 of 29 ## AGENDA REPORT ## Meeting Date: May 20, 2026 ## Meeting Type: Planning Commission ## Submitted By: Julie Beberg, Office Coordinator ## Title: Elect Vice Chair ## Background ## Elect Vice Chair ## Recommendation ## Elect Vice Chair ## Attachments and Other Resources ## Vision Statement We believe Fridley will be a safe, vibrant, friendly, and stable home for families and businesses. Page 29 of 29